Table of Contents
Advertisement
O per a tio n
7.3
Power control
There is a button in the connection area of the logger to turn the Power Control
function on or off.
NOTE
When Power Control is activated configuration of the device is
limited and a device scan is not possible.
1
Figure 8: Flick Power Control switch
Activate Power Control
1.
Open protective cover.
2. Turn Power Control switch left to the "ON" position.
3.
Close protective cover.
Deactivate Power Control
1.
Open protective cover.
2. Turn Power Control switch right to the "OFF" position.
3.
Close protective cover.
NOTE
When Power Control is deactivated an automatic and manual
inverter scan can be performed.
Operating manual Powador-piccoLOG_EN
Page 21
Advertisement
Table of Contents
