Table of Contents
Advertisement
Sa fety
2
Safety
2.1
Proper use
PowerControl is a control system of various operating parameters (such as idle
and active power, for instance) for use with photovoltaic plants.
The connections of this specific data logger and module should only be used
with the permitted signals and signal strengths.
Only suitable for installation indoors. For installation in outdoor areas or dusty
environments the device must be encased in a protective housing.
2.2
Protection features
•
Do not open the device.
•
Do not make any modifications to the device.
•
Discontinue use of any damaged device and have them checked by an
electrical specialist.
•
Ensure local regulations are observed when using the device.
•
The safety of the device and the operator are not guaranteed if the safety
instructions are not followed.
Page 8
Operating manual Powador-piccoLOG_EN
Advertisement
Table of Contents
