Function #15 - Set Master Code - PTI Falcon Installation And Operation Manual

Function #15 - Set Master Code is used to enter a master code into the PTI Falcon base
unit memory. The master code will not open any entrance and must be unique, it cannot be
assigned to a customer as it will not allow access. When the master code is entered into a
remote keypad, the keypad display will enter the contrast adjustment procedure. Contrast
adjustment then proceeds in a f a shion similar to that in Function #13 for the base unit
display.
After selecting Function #15, the display will appear as
indicated. Enter the master code of your choice and press
"#". The PTI Falcon will save the master code in memory
and return to the date and time display. The master code
may be up to eight digits in length like any other access
code. Verify operation of the master code by entering the code at a remote keypad. The
remote keypad display will go into the contrast adjustment procedure.
Entry of the master code at a remote keypad will be logged on the printer as part of the
access log, but the entrance cannot be opened with the master code.
42
Function #15 -
Set Master Code?
Enter Master
Code: 87654321