Function #10 - Save On Tape - PTI Falcon Installation And Operation Manual

Function #10 - Save on Tape allows you to record the contents of the system memory on a
standard audio cassette recorder for memory backup purposes. This unique feature allows
you to separate your customer data from the machine as well as make multiple backup
copies for enhanced reliability. Backup tapes can be made even after the AC power has
failed while operating from internal battery power. Backup tapes should be made on a
regular basis, anytime that significant changes have been made to the customer data in the
machine.
Prior to selecting Function #10, plug the audio patch cord
into the jack on the front of the PTI Falcon. Plug the other end
into the microphone jack of the tape recorder. After
selecting Function #10, the display will instruct you to " Start
Tape, Hit # ". Push the record button and then press the "#"
key.
The display will then indicate " ** Saving ** ". This display will
stay on for about ten seconds and then will begin to blink on
and off. When the tape is almost complete, the display will
stop blinking and will be on constantly again for a few
seconds. The display will then return to the current date and
time.
When the date and time has returned to the display, the tape is complete and you may stop
the recorder, rewind the tape, and remove it for safe keeping. Before storing the tape, it is
suggested that you verify the tape contents by loading the tape back to the PTI Falcon
using Function #11. The PTI Falcon verifies the integrity of each section of the tape before
loading it, so you cannot alter the contents of memory if your tape did not properly record.
You may wish to listen to the sound of a good tape out loud and become accustomed to the
sound. This will help you to identify any future problems with tape quality.
Function #10 -
Save on Tape?
Start Tape,
Hit #
** Saving **
37