Function #6 - Suspend Unit - PTI Falcon Installation And Operation Manual

Function #6 - Suspend Unit is used to temporarily block access for a unit. No data on the
unit is lost, but if the user attempts to enter the property, he is denied access. The
attempted entry will be logged on the printer as part of the access log. The customer will be
informed on the display of the remote keypad that his access has been suspended.
Enter the Building Number of the unit that you wish to lock
out.
Enter the Unit number of the unit that you wish to lock out.
The screen will then say "Do More?". If you wish to lock out
other access codes, press "#" and you will return to the first
step above, otherwise press "*".
If you enter either a Building Number or a Unit Number that
does not exist, the screen will indicate an "Error -
Nonexistent" message for a few seconds and then return to
allow you to re-enter the Building or Unit number.
Function #6 -
Suspend Unit?
Building (1-32)
Number: 1
Unit (1-Size)
Number: 150
Do More?
Error -
Nonexistent
33