Cleaning And Maintenance S; Replacing Light Tubes And Starters; Troubleshooting And Service S - Norcool Corner fridge User Manual

Corner fridge
Cleaning and maintenance
Look up for the rotating fan behind a cover in the upper part of the back wall. Disconnect mains
plug for cleaning.
To avoid mould forming, bad smells etc, regular cleaning is essential. We recommend mild, warm
soapy water for cleaning inside the fridge. Clean the collection channel and drain on the cooling
wall at least four times per year or as required, such that defrosted water can run unobstructed out
and evaporate. Prevent cleaning water running down this channel and into the evaporation bowl.
Do not wash door boxes in the dishwasher, as they can deform. Avoid using detergents with lemon
additive, as they can cause cracking and discolouring inside.
Replacing light tubes and starters (See fig. 9)
Specification of neon light tube: F30W/133 Cool White, diameter Ø26mm.
Remove the glass shelves in front of the light cover. Squeeze the upper part of the cover together
from each side and pull out. Slacken the tube by turning it a quarter turn before pulling it out.
Insert a new tube firmly and turn a quarter turn. Always replace starter when replacing a tube.
Fig 9
Troubleshooting and service
Remove glass shelves, disconnect from mains and remove back wall for service by unscrewing the
five plastic screws. Extract back wall through door opening.
If too much condensation water accumulates, it will not run out onto the kitchen floor, as an extra
drip pan will collect it.
10