Aastra MBU 400 User Manual page 40

40
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Changing Advisory Tones
Advisory tones warn you that something is about to happen or is happening. There are
three advisory tones you can enable or disable individually. By default all advisory
tones are enabled.
To set Advisory Tones on the handset do the following.
1. In Idle mode, press OK
Settings
2. Select
Audio settings
3. Select
Advisory tones
4. Select
5. Select the type of tone you want to enable or disable by pressing the OK
For available sounds, see the table below.
Advisory Tone
Battery Alert
Range Tone
Confirmation
Enabling/Disabling Silent Mode
You can enable or disable a silent mode on the phone. When disabled, all ringer
melodies, tones, confirmation sounds, and advisory tones are disabled. To enable/
disable silent mode:
1. In Idle mode, press OK
Settings
2. Select
Audio settings
3. Select
Silence
4. Select
Silent on
5. Select
sounds as you use the phone.
6. Press OK
Note: You can also enable or disable the silent mode from the idle screen by pressing
the "#" key, and pressing the
Setting Your Phone to Vibrate
You can select from different vibrator modes which vibrates the phone with an
incoming call. You can choose between vibrating only, vibrating and then ringing,
and vibrating as well as ringing.
To set your phone to vibrate do the following.
1. In Idle mode, press OK
Settings
2. Select
Audio settings
3. Select
Vibrator Mode
4. Select
to display the Main Menu.
and press OK .
, and press OK .
, and press OK .
Meaning
The batteries must be recharged.
The handset is out of range of the gateway.
You have saved or deleted an entry, or made a selection.
to display the Main Menu.
and press OK .
, and press OK .
, and press OK .
to disable all sounds on the phone. Select
to save the setting.
Silence on
softkey or
to display the Main Menu.
and press OK .
, and press OK .
, and press OK .
key.
Silent off
to hear all
Silence off
softkey as required.
Aastra MBU 400 User Guide