Aastra MBU 400 User Manual page 39

Aastra MBU 400 User Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Audio settings
3. Select
Ringer volume
4. Select
5. Use the navigation keys to adjust the volume, and press OK .
Changing the Message Tone
You can set a tone that notifies you of a message waiting on your phone. You can also
disable message tones if required.
To set a message tone on your phone do the following.
1. In Idle mode, press OK
Settings
2. Select
Audio settings
3. Select
Message tone
4. Select
5. Select a tone from the list that notifies you of messages on your phone.
You can scroll through the list of tones using the navigation keys and hear a sample
of the tone by pressing the
For available tones, see the table below.
6. Press OK .
Base ramp
Crazy echo
Echo
Changing the Keypad Sound
When you press the keys on the keypad, a default tone is audible. You can change this
tone or disable it if required. To change the keypad sound:
1. In Idle mode, press OK
Settings
2. Select
Audio settings
3. Select
Keypad sound
4. Select
5. Select a sound from the list that you want to hear when you press the keypad.
You can scroll through the list of sounds using the navigation keys. To disable
keypad sounds, select
6. Press OK .
For available sounds, see the following table.
Silent
Ditter
Doomp
, and press OK .
, and press OK .
to display the Main Menu.
and press OK .
, and press OK .
, and press OK .
Play
softkey. To disable message tones, select
Message Tones
Little bell
X-low
Silent
to display the Main Menu.
and press OK .
, and press OK .
, and press OK .
Silent
.
Keypad Sounds
Dimp
Pip
Silent
.
39