Aastra MBU 400 User Manual page 29

Aastra MBU 400 User Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Changing the Access Code on the Gateway:
To change the gateway access code using the handset, do the following.
1. In Idle mode, press OK
Settings
2. Select
System Settings
3. Select
Access Code
4. Select
Gateway
5. Select
6. Enter a new access code.
The characters display as you type, but are encrypted after saving the access code.
7. Press OK.
Yes
8. Press the
The new access code is saved by the gateway. Record the access code here for
future reference:
Note: All handset access codes must match the gateway access code, or the
handsets will not register after the next reset.
Changing the Access Code on the Handset
To change the handset access code, do the following.
1. In Idle mode, press OK
Settings
2. Select
System Settings
3. Select
Access Code
4. Select
Handset
5. Select
6. Enter a new access code.
The characters display as you type, but are encrypted after saving the access code.
7. Press OK .
Yes
8. Press the
9. Press the red key
Note: All handset access codes must match the gateway access code, or the
handsets will not register after the next reset.
to display the Main Menu.
and press OK .
, and press OK .
, and press OK .
, and press OK .
softkey when prompted to save the access code.
to display the Main Menu.
and press OK .
, and press OK .
, and press OK .
, and press OK .
softkey when prompted to save the access code.
to exit.
CLR CLR
29