RCA IP115 User Manual page 57

by entering providing the following search base: OU=Development, O=COMPANY.
Other examples see below.
Default Value: <blank>
Examples:
： o=UNIVERSITY OF NEW ORLEANS,c=US
： o=SFU,c=CA
： dc=escene,dc=cn
3.2.6 User Name
Description: This setting specifies the bind "Username" for LDAP servers. Most
LDAP servers allow anonymous binds in which case the setting can be left blank.
However if the LDAP server does not allow anonymous binds, users will need to
provide the Username and Password allowed to query the LDAP server.
Default Value: <blank>
3.2.7 Password
Description: This setting specifies the bind "Password" for LDAP servers. RCA IP
phones use "simple" authentication scheme for bind requests. This setting can be
left blank in case the server allows anonymous binds. Otherwise users will need to
provide the Password along with the Username in order to access the LDAP server.
Default Value: <blank>
3.2.8 Max.Hits(1~32000)
Description: This setting specifies the maximum number of search results to be
returned by the LDAP server. If Max.hits is 0 or blank the LDAP server will return
all search results. Please note that a very large value of the Max.hits will slow
down the LDAP lookup, therefore the setting should be configure according to the
available bandwidth. The default value for this setting is blank.
Default Value: 50
3.2.9 LDAP Name Attributes
Description: This setting can be used to specify the "name" attributes of each re-
cord which are to be returned in the LDAP search results. This setting compresses
the search results, as the server only returns the attributes which are requested
by the RCA IP phone. The setting allows the user to configure multiple space
separated name attributes. Please consult the system administrator regarding
which name attributes are to be configured.
57