Connectors And Jumpers; C Connector (For Ambient/External Temperature Sensor) For Optional Temperature Sensor (Lm75); Internal Chipcard Reader Or Serial Port 2 (Com2) (External Via Wire) - Siemens D1107 Additional Technical Manual

Connectors and Jumpers

Some of the following connectors are optional!
!
2
I C connector (for ambient/external
temperature sensor) for optional
temperature sensor (LM75)
Pin Signal
1 3.3 V standby
2 Clock
3 Data
4 GND
Refer to chapter "Temperature monitoring / system
Internal chipcard reader or serial
port 2 (COM2) (external via wire)
Pin Signal
1 DCD 2 (low asserted)
3 SIN 2 (high asserted)
5 SOUT 2 (high asserted)
7 DTR 2 (low asserted)
9 GND
11 EXT SMI (low asserted)
13 RESETDRV (high asserted)
15 GND
A26361-D1107-Z180-6-7619
monitoring"
Pin Signal
2 DSR 2 (low asserted)
4 RTS 2 (low asserted)
6 CTS 2 (low asserted)
8 PC_ON_Strobe
10 VCC Auxiliary
12 VCC
14 GND
16 Key
1
2
1
Mechanics
English - 5