Download Print this page

Protecting Yourself While Home - NAPCO XP-600 Express Series User Manual

Hide thumbs Also See for XP-600 Express Series:

Advertisement

Arming Your System
Protecting Yourself While at Home
1
2
3
ARMED
READY
SYSTEM
FIRE
AC
Instant Mode
Pressing
done in the evening when all family members are home for the night. Instant Mode can be activated at any
ZONE 1
time after the system has been armed. The Red Armed light will flash rapidly while in the Instant Mode.
ZONE 2
Easy Exit (optional)
ZONE 3
Your System may have been programmed to allow Easy Exit, which allows a user to exit the premises
ZONE 4
with the system armed. By pressing
ZONE 5
zone for 3 minutes. This will allow, for example, an early morning commuter to exit the house in the
ZONE 6
morning, without having to disarm and rearm the system, waking the family.
Arming With a System Trouble Present (the 9 System Light is Lit)
If the XP600 has a system trouble present, the
pulsing. If you cannot immediately clear the system trouble, the system can still be armed. Simply
press
For more information, refer to page 12.
6
Before arming your system, make sure the Green Ready light is ON. This indicates that all of your
protective zones are secure. If any zones are open, the corresponding Zone light will be ON. Secure
those zones before proceeding.
Enter your user code. The Green Ready light will go out, and the Red Armed light will light.
Before your exit delay expires, press
as motion sensors, and allowing free movement throughout the premises. The Zone light of any
bypassed zones will flash slowly.
Your system may have been programmed for Automatic Interior Bypass , in which case it will recognize
that you have not left the premises and will automatically bypass any interior zones.

followed by

to view the trouble, press

to bypass any interior zones, deactivating devices such
will cancel the Entry delay , activating the "Instant" mode. This is typically


followed by
, the protection is removed from the Exit/ Entry
' '

SYSTEM l
again to reset the trouble and then arm the system.
Note: System troubles should be repaired as soon as possible.
ight will be lit and the keypad sounder

Advertisement

loading