Protecting Yourself While Home; Arming Your System - NAPCO GEMINI GEM-P400 User Manual

Hide thumbs Also See for GEMINI GEM-P400:
Table of Contents

Advertisement

Arming Your System

Protecting Yourself While at Home
1
Before arming your system, make sure the green Status light is ON. This indicates that all of your protective zones are
secure. If any zones are open, the corresponding zone number will be lit. Secure those zones before proceeding.
2
Enter your User Code and press
3
Before your exit delay expires, press
and allowing free movement throughout the premises. The Zone light of any bypassed zones will flash slowly.

O
Your system may have been programmed for Automatic Interior Bypass , in which case it will recognize that you have
not left the premises and will automatically bypass any interior zones.
Instant Mode
Pressing
will cancel the Entry delay , activating the "Instant" mode. This is typically done in the evening when all family
members are home for the night. Instant Mode can be activated at any time after the system has been armed. The red Armed

light will flash rapidly while in the Instant Mode.
Easy Exit (optional)
Your System may have been programmed to allow Easy Exit, which allows a user to exit the premises with the system armed.
By pressing
followed by
This will allow, for example, an early morning commuter to exit the house in the morning, without having to disarm and rearm the
system, waking the family.
Arming with a System Trouble Present (TROUBLE

If the GEM-P400 has a system trouble present, TROUBLE
immediately clear the trouble, the system can still be armed. Simply press
Press
to view any other troubles, and exit the TROUBLE mode when done. Enter your User Code and press
the system. For more information, refer to page 11.
Oi230a
page 7

.
The green Status light will go out, and the red Armed light will light.
to bypass any interior zones, deactivating devices such as motion sensors,


, the protection is removed from the Exit/ Entry zone for 3 minutes.

will be lit and the keypad sounder pulsing. If you cannot
Note: System troubles should be repaired as soon as possible.

is lit)
followed by
to view the trouble.

to arm
7
Tuesday, September 16, 1997 08:26

Advertisement

Table of Contents
loading

Table of Contents