MAXDATA Notebook User Manual page 79

Chapter 6 — The Exit Menu
Exit Description
Field
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Save Changes
Battery Calibration
Once you are finished making your selections, choose this option from the Exit
menu to ensure the values you selected are saved to CMOS memory. The next
time you bootup the computer, the BIOS will attempt to load the values you saved
in Non-Volatile memory. If these values cause the system boot to fail, reboot and
press <F2> to enter the Setup Utility. Once in the Setup Utility, you can try to
change the values that caused the system boot to fail. If the problem persists, load
the default values as described below.
This option should only be used if you do not want to save the changes you have
made to the Setup Utility. If you have made changes to the fields other than
system date, system time and password, the system will ask for confirmation
when choosing Exit Discarding Changes.
This option allows you to load the default values for each of the parameters on the
Setup menus. You can now select Exit Saving Changes or make other changes
before saving the values to Non-Volatile RAM.
This option allows you to discard the selections you've made and restore the
values you previously saved.
This option saves your selections without exiting the Setup Utility. You can then
return to other menus and make changes.
Selecting this feature enters the battery training utility.
74
Function