Table of Contents
Advertisement
The options for Display Dev ice are described below.
LCD or CRT
Choosing LCD will select your laptop's built-in LCD screen as the primary display.
Choosing CRT will select an attached VGA monitor as the primary display.
In either LCD or CRT mode, the video display hot key combination is available—you
can cycle the video output by pressing <Fn> + <F2>.
LCD/CRT
In this option, there is no primary display. If the external CRT is connected, the display
on the LCD and the CRT is exactly the same.
In LCD/CRT mode, the video display hot key combination is available—you can cycle
the video output by pressing <Fn> + <F2>.
Tip: To ensure trouble-free video output, the first time you use an external monitor,
change the output in the Display Properties dialog box. After successfully switching
modes, you may use the video function keys.
Zoom Video
Zoom video technology allows you to view video at full speed, without the slowdown that often accompanies
video images played on a computer.
Your computer's PC card slot supports ZV interface cards such as MPEG-II or Video Capture cards. To take
advantage of ZV technology, you will need to install a ZV card in the PC card slot. Contact your retailer for
more information.
Note: Light or dark dots may appear on the LCD due to technical limitations of LCD
manufacturing. This will not effect normal operation of the LCD.
Chapter 2 — The Graphics System
39
Advertisement
Table of Contents
