3. MEDIA AND RIBBON SPECIFICATIONS
3.5
GUARANTEED PRINT AREA
Printing must be performed within the shaded area as illustrated below.
If a printed image is placed outside this area, the loaded ribbon may be torn or the print quality may be
degraded.
1. Die-cut label
2. Notched media
B
A
B
Label width
Media width
A = 2 mm or over
B = 1.5 mm (if a label length is 100 mm or less)
B = 2.5 mm (if a label length is more than 100 mm)
B
A
B
Media width
A = 2 mm or over
B = 1.5 mm (if a notch pitch is 100 mm or less)
B = 2.5 mm (if a notch pitch is more than 100 mm)
A
A
3-5
EO13-33001
3.5 GUARANTEED PRINT AREA