3. MEDIA AND RIBBON SPECIFICATIONS
3.4
LABEL WITH BLACK MARKS
"Label with black marks" refers to a label stock with black marks printed at the back of the backing
paper for the position detection purpose, as illustrated below. When a label stock with black marks is
loaded, the Reflective Media Sensor is used.
Black mark on
the reverse
side
Reflective Media Sensor
(Located under the media)
15 to 120 mm
12 mm or over
Media feed direction
2 to 13 mm
3-4
EO13-33001
3.4 LABEL WITH BLACK MARKS
Label pitch
10 to 1,000 mm
Page start line