Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker rotary hammer drill has been designed protected supply. Use of an RCD reduces the risk of for drilling in wood, metal, plastics, and masonry as well as for electric shock.
d. Store idle power tools out of the reach of children and This tool is not intended for use by persons (including do not allow persons unfamiliar with the power tool or children) with reduced physical, sensory or mental these instructions to operate the power tool.
Features To operate the operating mode selector (4), push the unlock button (11) and rotate the selector towards the This tool includes some or all of the following features. required position, as indicated by the symbols. 1. Variable speed switch 2.
Warning! Before performing any maintenance, switch off and You can check the location of your nearest authorised repair unplug the tool. agent by contacting your local Black & Decker office at the Regularly clean the ventilation slots in your tool using address indicated in this manual.
Page 8
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
Page 12
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...