Download  Print this page

Black & Decker BPHR272 Manual

Black & decker bphr272 rotary hammer
Hide thumbs


Quick Links




  Summary of Contents for Black & Decker BPHR272

  • Page 1 ® BPHR272 ENGLISH...
  • Page 2 * The picture above may differ slightly to actual unit.
  • Page 3: Intended Use

    ENGLISH flammable liquids, gases or dust. Power BPHR272 tools create sparks which may ignite the dust or ROTARY HAMMER fumes. c. Keep children and bystanders away while Technical data operating a power tool. Distractions can cause you to lose control.
  • Page 4: Hammer Safety Warnings

    ENGLISH maintained cutting tools with sharp cutting connecting to power source and/or battery edges are less likely to bind and are easier to pack, picking up or carrying the tool. control. Carrying power tools with your finger on the g. Use the power tool, accessories and tool switch or energising power tools that have the bits etc.
  • Page 5: Residual Risks

    ENGLISH Safety of others If the wire is damaged, it should be replaced by This appliance is not intended for use by per- the manufacturer or a service center authorized sons (including children) with reduced physical, by Black & Decker, to avoid danger. sensory or mental capabilities, or lack of experi- Part name ence and knowledge, unless they have been...
  • Page 6: Maintenance

    ENGLISH Select the depth of holes to be drilled (Fig. steel tube. Chipping/Chiseling (Fig. B) A depth gauge is an easy to use ruler to ensure When the cutting / stripping / removing opera- that the drilling depth is consistent. Unlock the side tion is conducted, please put the operation handle, adjust the depth gauge according to the modes selector (3) to position...
  • Page 7: Protect The Environment

    ENGLISH solvents or other irritant chemicals. These from the power source. In addition, except chemicals may weaken the materials of the regular cleaning on your charger, no other these components. Use a cloth moistened maintenance is needed. with a mild soapy water to clean it. Do not Regularly use the soft brush or dry cloth to let any substance permeate into the tool clean the ventilation slot of the equipment /...
  • Page 8 N385514 03/2014...