Webasto Telestart T91 Installation Instructions Manual page 12

Temperature sensor installa-
tion (only with T100 HTM)
The supplied temperature sensor should be
arranged in the vehicle so it takes a repre-
sentative measurement of the temperature
inside the vehicle.
The temperature sensor should be fitted:
- Where it is not exposed to direct sun-
light
- Where it is not close to the vehicle
heating nozzles
T100 HTM temperature sensor
- Define the installation location of the
temperature sensor inside the vehicle
(check how much cable is available)
- Attach the temperature sensor with a
3.5 mm self-tapping screw (max.
torque 1 Nm)
Table 1 Default settings of comfort level
Max. heat flow of heater
Compact car
Mid-size car, mini van, sedan
Full-size car, van, SUV
Telestart T91 / T100 HTM
Default settings of com-
fort level
Teach-in the Telestart T100 HTM as
described in the operating and servicing
manual.
We recommend the default settings in ac-
cordance with Table 1 depending on the ve-
hicle type and the heater used.
Note:
These settings can be optimised to suit the
customer's individual comfort requirements.
4 kW 5 kW
(with circulation pump cycling)
C3 C2
C4 C3
- C4
5 kW
C1
C2
C3
23