PTM800Pro Mainboard Manual
The options are: Auto, Disabled.
OnChip USB Controller
Disable this option if you are not using the onboard USB 1.1 and USB 2.0 feature.
The options are: Disabled, Enabled.
OnChip USB2.0 Controller
Disable this option if you are not using the onboard USB 2.0 feature (USB 1.1 not
effected). The options are: Disabled, Enabled.
USB Legacy Support
When set at Auto, the BIOS will detect if USB keyboard is installed automatically.
The options are: Auto, Disabled, Enabled.
SuperIO Device
Onboard Serial Port 1/2
If the serial port 1/2 uses the onboard I/O controller, you can modify your serial
port parameters.
The options are: 3F8/IRQ4, 3E8/IRQ4, 2F8/IRQ3, 2E8/IRQ3, Disabled.
UART Mode Select
Allows you to select the IR modes if the serial port 2 is used as an IR port. Set at
Standard, if you use COM2 as the serial port as the serial port, instead as an IR
port. The options are: Normal, IrDA, ASKIR, SCR.
Onboard Parallel Port
Allows you to select from a given set of parameters if the parallel port uses the
onboard I/O controller.
The options are: Disabled, 378/IRQ7, 278/IRQ5, 3BC/IRQ7.
Parallel Port Mode
Allows you to connect with an advanced printer via the port mode it supports. The
options are: SPP, EPP, ECP, ECP+EPP.
3- 7