Raymarine CP450C Installation Instructions Manual page 25

1
3
3
4
Item
1
2
3
4
Note: *To connect the CP450C to a Raymarine network switch
with SeaTalk hs connectors a RayNet to SeaTalk
is required.
Note: Ensure network cables and connections are tight and
secure using any cable ties provided with your network hardware.
Cables and connections
2
2
3
Description
CP450C
Compatible Raymarine multifunction
displays
*RayNet to RayNet network cable
Raymarine network switch
hs (RJ45) cable
Network hardware
Item
HS5 SeaTalk hs network
switch
SeaTalk hs network
switch
SeaTalk hs crossover
coupler
D12236-1
RayNet connector network cables
Cable
1 m (3.28 ft) RayNet to SeaTalk
(RJ45) cable
2 m (6.56 ft) RayNet to RayNet cable
Part number Notes
A80007 5–port switch for
network connection
of multiple SeaTalk
devices featuring
RayNet connectors.
Equipment with
SeaTalk
can also be connected
via suitable adaptor
cables.
E55058 8–port switch for network
connection of multiple
SeaTalk
E55060 Enables direct
connection of SeaTalk
devices to smaller
systems where a switch
is not required. Also
enables the connection
of SeaTalk
to an HS5 SeaTalk
network switch (in
conjunction with a
RayNet to RJ45 cable).
Part number
hs A62360
A62361
hs
hs connectors
hs devices.
hs
hs devices
hs
25