cHaptEr 8: Elliptical trainEr SpEcificationS anD aSSEMbly gUiDE
8.2 aSSEMbly inStrUctionS - continUED
tHE HarDWarE nEEDED for
StEp 4 iS prE-attacHED to
tHE partS
StEp 4
1) Attach the lower handlebars to the console mast.
a. remove the pre-attached hardware.
b. Slide 1 large flat washer, 1 wavy washer, and another large flat washer to the console mast.
c. Slide the lower handlebar onto the console mast and attach using 1 large flat washer, 1 handlebar cap, 1 flat washer, 1 spring washer,
and 1 bolt.
d. repeat on the opposite side.
56