Goodman ComfortNet ACVC9 Technical Manual page 26

BLOWER PERFORMANCE SPECIFICATIONS
GMVC95/AMVC95 Continuous Fan Speed Chart
Model
GMVC950453BX*
AMVC950453BX*
GMVC950704CX*
AMVC950704CX*
GMVC950905CX*
AMVC950905CX*
GMVC950905DX*
AMVC950905DX*
GMVC951155DX*
AMVC951155DX*
1
Continuous fan s peed is 30% of furnace m axim um CFM
2
Three continuous fan s peeds are pos s ible with the CTK01AA
therm os tat: 30% , 50% , and 70% of furnace m axim um CFM
GCVC9/ACVC9 Continuous Fan Speed Chart
Model
GCVC90704CX*
ACVC90704CX*
GCVC90905DX*
ACVC90905DX*
GCVC91155DX*
1
Continuous fan speed is 30% of furnace maximum CFM
2
Three continuous fan speeds are possible with the CTK01AA
thermostat: 30%, 50%, and 70% of furnace maximum CFM.
GCVC95/ACVC95 Continuous Fan Speed Chart
Model
GCVC 950714CX*
ACVC950714CX*
GCVC 950915DX*
ACVC950915DX*
1
Continuous fan speed is 30% of furnace maximum CFM
2
Three continuous fan speeds are possible with the CTK01AA
thermostat: 30%, 50%, and 70% of furnace maximum CFM.
1. Units are shipped without filter(s). CFM in chart is without filter(s).
2. All furnaces shipped with heating speed set at "B" and cooling speed set at "D". Installer should adjust blower speed
as needed. The first task is to determine the proper aiflow for the cooling system.
3. For most cooling applications, about 400 CFM per ton is desirable.
4. The chart is for information only. For satisfactory operation, external static pressure not to exceed value shown on
rating plate.
5. Do not operate above 0.5" w.c. ESP in heating mode. Operating between 0.5" w.c. and 0.8" w.c. is tabulated for cooling
purposes only.
6. * Motor CFM minimum.
26
Continuous Fan
Furnace Maxim um
CFM
1400
1760
2200
2200
2200
Continuous Fan
Furnace Maximum
CFM
1760
2200
2350
Continuous Fan
Furnace Maximum
CFM
1760
2200
1,2
Speed
420
530
660
660
660
1,2
Speed
530
660
705
1,2
Speed
530
660