Panasonic PJLink PT-LW330 Operating Instructions Manual page 76

Description of each item
1 [System Status]
The [System Status] page is displayed by clicking this
item.
2 [General Setup]
The [General Setup] page is displayed by clicking this
item.
3 [Picture Setup]
The [Picture Setup] page is displayed by clicking this
item.
[System status] page
Display the status of the projector for the following items.
1 [Model Name]
Displays the model No. of the projector.
2 [Versions]
Displays the version of the firmware of the projector.
[General Setup] page
[Change Password for Webpage] is displayed.
1 [Enter Old password]
Enters the configured password.
2 [Enter New password]
Enters the new password.
3 [Confirm New password]
Enters the desired new password again for
confirmation.
76 - ENGLISH
Chapter 4 Settings - Network control
4 [Image Setup]
The [Image Setup] page is displayed by clicking this
item.
5 [Network Setup]
The [Network Setup] page is displayed by clicking
this item.
3 [LAN Status]
Displays the connection status of the LAN.
4 [Apply]
Updates the settings.
5 [Power]
Turns on/off the power.
6 [Source Select]
Switches the input source of the projector.
1
2
3
4
5
1
2
3
1
2
3
4
5
6