Control Panel And Indicators; Rear Terminals - Panasonic PJLink PT-LW330 Operating Instructions Manual

9 Projection Lens
10 Air exhaust port
11 <AC IN> terminal
Connect the supplied power cord.
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.

Control panel and Indicators

1 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
2 Power <v/b> button
Turns the projector on/off.
3 asqw buttons
Used to select the menu items in the menu operation.
<MENU> / q button
4
Displays the menu screen.
Note
f The <INPUT/ENTER> button on the control panel is functioned as the <ENTER> button when the menu screen is displayed.
The operating procedure of menu screen is described as "Press the <ENTER> button" in this manual in order to unify the
control panel operation with the remote control operation.

Rear terminals

r Only for PT-LB360, PT-LB330, PT-LW330 and PT-LW280
1 2
9
1 <VARIABLE AUDIO OUT> terminal
This is the terminal to output audio signal input to the
projector.
Chapter 1 Preparation - About your projector
1
2
3
4
3
10 11
12 Security slot
This security slot is compatible with the Kensington
security cables.
13 Rear terminals
14 Speaker
5
6
7
5 Warning indicator <WARNING>
Indicates the abnormal conditions of the projector.
6 <KEYSTONE> button
Used to correct the keystone. (
7 <INPUT/ENTER> / w button
Displays the input source menu. (
Used to execute <ENTER> button when the menu
screen appears.
4 5
2 <VIDEO IN> terminal
This is the terminal to input video signals.
Æ page 39)
Æ
pages 37, 48)
6 7
ENGLISH - 21
8