SAFARI Trek 2002 Owner's Manual page 21

Power Switch:
The switch, when ON (in) position, turns on the monitor for viewing. The green LED indi-
cator illuminates. When the switch is OFF (out), the monitor is in a STANDBY mode
of operation. The green LED remains illuminated when the ignition is on. The moni-
tor displays rear viewing when the transmission is shifted to REVERSE.
Camera Selector:
This switch should be left in the CA1 (out) position. CA2 (in) position is not used in the
motorhome.
Day/Night Switch:
This switch should be left in the DAY (out) position for normal viewing. When set in
NIGHT (in), picture brightness is reduced. NIGHT should be used for night viewing and
driving through tunnels.
Bright Control:
Clockwise rotation increases the picture brightness. Counterclockwise rotation decreas-
es the picture brightness.
Contrast Control:
Clockwise rotation increases the picture contrast. Counterclockwise rotation decreases the
picture contrast.
Audio Control:
Clockwise rotation increases the volume level. Counterclockwise rotation decreases the
volume level.
The camera angle may be adjusted to display a suitable rear view. The camera housing cover
will need to be removed to gain access to the hexagon mounting bolts. The mounting bolts
can be repositioned to the desired angle. Refasten the camera housing cover and seal using
an appropriate sealant.
Refer to the manufacturer's manual for details on how to operate the camera.
6. Gen Set Start
This switch allows you to remotely start the generator.
Trek Owner's Manual
1 ~ 21