Configuring the SV9100
The SV9100 should have an IP address assigned to the CCPU or IPLE card that is connected to the
network. A TCP Port has to be assigned for 3rd Party CTI to connect to, the recommended port is
8181.
Assign the port in Wizards / Advanced Items / CTI / CTI Server (PRG 10-20 Dev1.) Set the CTI
Server TCP Port to 8181.
rd
A license is required to turn on 3
Party CTI on an SV9100 (BE114079). Once enabled (Will be
supplied 999 allowing up to 999 devices) any number of extensions can used the TAPI service.