Max-Ox MX-900B Operator's Manual page 35

Feed Auger Motor
• Press Motor icon to open Feed Auger control screen
• Displays Feed Auger motor status: run (green), stop (red)
• % display, located above Feed Auger motor icon, displays variable
speed Feed Auger motor speed as a percentage of the available speed
range bounded by the minimum and maximum motor frequency set-
points.
Fuel In-Feed
• Press In-Feed icon to open Fuel InFeed control screen
• Displays time remaining until an automatic Metering Bin fill cycle
will occur.
Ash Auger Motor
• Press Motor icon to open Ash Auger control screen
• Displays Ash Auger motor status: run (green), stop (red)
• % display, located to right of Ash Auger motor icon, displays variable
speed Ash Auger motor speed as a percentage of the available speed
range bounded by the minimum and maximum motor frequency set-
points.
Alarms
• Press Alarm icon to open the Alarms control screen
Gage
• Press Gage icon to open the Gages screen
Boiler Pump
• Press Boiler Pump icon to open the Boiler Pump control screen.
• Displays Boiler Pump motor status: run (green), stop (red)
Load Btu/hr
• Displays the instantaneous power output of the boiler vessel, BTU/hr
Boiler Vessel
• Press Boiler Vessel icon to open Supply Temp. Controller screen.
Max-Ox™ MX-900B Operators Manual, Rev. 0
Page 35 of 54