Connecting Mp-11X To Power; Figure 2-18: Connecting To The Power Supply - AudioCodes MediaPack Series MP-11x Installation Manual

2.4.6

Connecting MP-11x to Power

MP-11x is powered from a standard alternating current (AC) electrical outlet.
Warnings:

To connect MP-11x to the power supply:
1. Connect the line socket of the AC power cord (supplied) to the device's AC power
socket (labeled 100-240V 0.3A ~50-60 Hz), located on the rear panel.
2. Connect the plug at the other end of the AC power cord to a standard electrical outlet.
Hardware Installation Manual
•
The device must be connected only by professional service personnel.
•
Ensure that the device connects to an electrical socket outlet that
provides protective earthing (grounding). Prior to connecting power, refer
to the Regulatory Information document supplied with the device.
•
Use only the AC power cord supplied with the device.

Figure 2-18: Connecting to the Power Supply

20
MediaPack Series
Document #: LTRT-59815