Changing The Light Bulb - Viking Built-in French Door Bottom-Freezer Refrigerator Use & Care Manual

Cleaning and Maintenance
Changing the Light Bulbs
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to
replace the bulb with one of the same size and shape. The lights
require a 40-watt maximum appliance bulb. Replacement bulbs are
available from your dealer.
Refrigerator Lights
There are three light bulbs located in the top front of the refrigerator
compartment behind a light shield.
1. Remove the top grille. See "Power On/Off Switch."
2. Press power switch to the Off position.
3. Open the light shield. Grasp the light shield by the openings.
Gently push back and pull down, as shown, to access the light
bulbs.
4. Remove the light bulb and replace it with one of the same size,
shape and wattage.
5. Close the light shield by raising it up into place.
NOTE: If needed, clean the light shield with a damp soft cloth.
6. Press the power switch to the On position.
7. Replace the top grille. See "Power On/Off Switch."
Freezer Lights
There are two light bulbs located in the top of the freezer
compartment. One bulb is over the ice bin, and the other bulb is over
the freezer pan.
1. Slide open the ice bin or freezer pan to access the light bulb.
2. Remove the light bulb and replace it with one of the same size,
shape and wattage.
Light
Bulb
28
Light
Shield
Light Bulb