Download  Print this page

Ice And Water - Viking Built-in French Door Bottom-Freezer Refrigerator Use & Care Manual

Built-in french door bottom-freezer refrigerator.
Hide thumbs

Advertisement

Table of Contents
Troubleshooting

Ice and Water

Problem
Cause
The ice maker is
Refrigerator connected to a
not producing
water supply and the supply
ice or not
shutoff valve turned on?
enough ice
Kink in the water source
line?
Ice maker turned on?
New installation?
Large amount of ice recently
removed?
Ice cube jammed in the ice
maker ejector arm?
Reverse osmosis water
filtration system connected
to your cold water supply?
The ice cubes are
Water shutoff valve not fully
hollow or small
open?
Note: This is an
Kink in the water source line?
indication of low
water pressure.
Reverse osmosis water
filtration system connected
to your cold water supply?
Ice is sticking
It is normal for frost to be on
together in the
top of the ice storage bin
ice storage bin.
due to normal opening and
closing of the freezer.
It is normal for ice to stick
together when it is not
dispensed or used
frequently.
(cont.)
Solution
Connect refrigerator to
water supply and turn water
shutoff valve fully open.
A kink in the line can reduce
water flow. Straighten the
water source line.
Make sure switch is in the
ON position.
Wait 24 hours after ice maker
installation for ice production
to begin. Wait 72 hours for
full ice production.
Allow 24 hours for ice maker
to produce more ice.
Remove ice from the ejector
arm with a plastic utensil.
This can decrease water
pressure. See "Water Supply
Requirements".
Turn the water shutoff valve
fully open.
A kink in the line can reduce
water flow. Straighten the
water source line.
This can decrease water
pressure. See "Water Supply
Requirements".
It is recommended tht the
ice storage bin be emptied
and cleaned as needed. See
"Ice Maker"
33

Advertisement

Table of Contents

   Also See for Viking Built-in French Door Bottom-Freezer Refrigerator

   Related Manuals for Viking Built-in French Door Bottom-Freezer Refrigerator

Comments to this Manuals

Symbols: 0
Latest comments: