Adjusting Controls - Viking Built-in French Door Bottom-Freezer Refrigerator Use & Care Manual

Built-in french door bottom-freezer refrigerator
Hide thumbs Also See for Built-in French Door Bottom-Freezer Refrigerator:
Table of Contents

Advertisement

Using the Controls
Turning Refrigerator On and Viewing Set Points
Press the ON/OFF touch pad.
NOTE:
■ After the refrigerator is turned on, the Over
Temperature audio alarm and indicator light may activate every 1¹⁄₂
hours until the refrigerator and freezer temperatures are below
48°F (9°C) and 15°F (-9°C), respectively, or until the alarm is turned
off. To turn off the audio alarm and indicator light, see "Master
Alarm Reset."
■ The ON/OFF touch pad on the control panel shuts down
refrigerator functions such as cooling, lighting, fans and
compressors. To turn the power off completely, use the power
ON/OFF switch located behind the top grille. See "Power On/ Off
Switch."
Viewing the Celsius Temperatures
■ Press °C touch pad. To redisplay degrees
Fahrenheit, press °C again.
NOTE: If the freezer temperature is below zero, the
negative sign next to the freezer display will light up.
This is normal.

Adjusting Controls

NOTE: Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
To Adjust Set Point Temperatures:
■ Press the refrigerator or freezer PLUS (+) or MINUS (-) touch pad
until the desired temperature is reached.
0
■ Press the Set To Recommended touch pad to reset the set points
to the factory recommended temperatures.
NOTE: The set point range for the freezer is -5°F to 5°F (-21°C to -
15°C). The set point range for the refrigerator is 33°F to 45°F (0°C
to 7°C).
37
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents