Joyner Go-kart JNSZ650DS Owner's Manual page 19

8. Check Engine Stop key. Perform engine stop key test. Repair as necessary.
9. Check all Nuts, Bolts, and fasteners. Check wheels to see that all axle nuts and lug
nuts are tightened properly. Check and tighten as necessary all other fasteners to
specified torque.
10. Check Roll Cage Bars. Ensure all protective roll cage bars are in place before
operating the Go-Kart.
12. Check Brake Light. Check for proper operation.
13. Check Wheels. Check for tightness of wheel nuts and axle nuts; check that axle nuts
are secured by cotter pins.
14. Check Steering. Check for free operation and for any unusual looseness in any area.
Always follow rules for safe operation and wear a helmet.
OPERATION
C. Passengers
The vehicle allows for two riders only.
Combined maximum weight of driver
and the passenger should not exceed 180kg
or 400Ibs.
D. Seat Adjustment
The seat must always be securely
fastened in the position which best
allows the operator control of the foot
pedals, steering wheel, and the remote
stop key.
a. Pull seat adjustment handle upward to disengage seat slide.
b. Move seat to desired position.
c. Be sure seat adjustment handle snaps back into place and that seat is locked
into position. (See Fig. 4 )
Before attempting to adjust the seat ensure that engine of the Go-Kart is stopped.
Never operate this Go-Kart when the provided seat is not securely fastened, to do so could
result in a strong possibility of severe personal injury or loss of life. Before attempting to
adjust the seat ensure that engine of Go-Kart is stopped.
Figure 4
18