Joyner Go-kart JNSZ650DS Owner's Manual page 17

OPERATION
d. Start engine
1. Engage the park brake
2. Press the clutch pedal down,
put the shift lever in neutral
3. Insert the key into the
ignition-switch
If the engine is cold;
1. Pull the choke out fully
2. Press down the clutch pedal
3. Turn the key clockwise to the "on" position. Release the key and the clutch
pedal when the engine starts.
4. Push the choke back slowly to allow the engine to run smoothly. Keep engine
running for 1-2 minutes.
5. Push the choke back fully. If the idle of engine is not smooth, pull out the choke
to find the best running position and keep running for a while long until the engine ryns
smooth without choke.
If the engine is warm;
Press the throttle slightly and turn the key clockwise to the "on" position, release
the key and the throttle when the engine starts.
Each time prior to starting the engine, check the throttle assembly to ensure that when
pedal is pushed all the way forward the assembly is working smoothly and returns to idle
when released. Do not operate if pedal or engine throttle linkage fail to return to idle. If
unable to correct the problem through lubrication, adjustment or replacement of worn parts,
contact your dealer for assistance.
Figure 1
Figure 2
16