Joyner Go-kart JNSZ650DS Owner's Manual page 12

Nuts & Bolts
■
Check the wheels to see that the axle nuts are tightened, Use a wrench to make
sure all accessible nuts, bolts, and fasteners are tight.
Pre-drive Inspection
■
Underbody & Exhaust System
■
Check for, and remove any dirt, vegetation or other debris that could be fire hazard
or interfere with the proper operation of the Go-Kart.
Air Cleaner
■
Check the air filter. Replace it if needed.
Leaks, Loose Parts
■
Walk around you Go-Kart and look for anything that appears unusual, such as a
leak or loose cable.
Lights
■
Make sure the headlight, brake light and tail light are working properly.
Throttle
■
Check the free play and adjust if needed. Press the throttle to make sure it moves
smoothly without sticking, and snaps back automatically when it is released.
Clutch cable
Check the free play of clutch cable and adjust if needed. Press the clutch cable to
make sure it moves smoothly without sticking, and snaps back automatically when
it is released.
Brakes
■
Press the brake pedal several times, check for proper brake pedal free play. Make
sure there is no brake fluid leakage.
Engine Stop
■
When engine is running, turn the switch key counterclockwise. Make sure engine
stops.
Steering Wheel
■
Check that the wheels turn properly as you turn the steering wheel.
Cable
■
Check the cable housing for wear. Check the fittings are tight. Replace or tighten as
needed.
Tie rod
■
Check the tie rod housing for wear. Check the fittings are tight. Replace or tighten
as needed.
11