Motherboard User's Guide
System Memory Controller Support
•
-Supports DDR2 SDRAM with up to maximum memory of 2 GB
PCI Express Graphics Interface Support
•
-One PCIEX16 slot for Graphic Interface
PCI Bus Interface
•
-Supports PCI Revision 2.3 Specification at 33 MHz
Integrated Serial ATA Host Controller
•
-Supports four ports with data transfer rate up to 3.0 Gb/s
Integrated IDE Controller
•
-Ultra ATA 100/66/33 Support
USB 2.0
•
-Integrated USB 2.0 Host Controller supporting up to eight USB 2.0
ports
Memory Support
Two DIMM sockets for DDR2 667/533/400 DDR SDRAM with Dual-
•
channel architecture
Maximum installed memory is 2 GB
•
Expansion Slots
One PCIEX16 slot for Graphic Interface
•
Two 32-bit PCI v2.3 compliant slots
•
One 40-pin IDE connector that supports two IDE devices
•
One floppy disk drive interface
•
Four 7-pin SATA connectors
•
Onboard IDE connector
One IDE connector that supports PIO (Programmable Input/Output)
•
and DMA (Direct Memory Access) modes
Supports IDE Ultra DMA bus mastering with transfer rates of 100/66/33
•
MB/sec
Serial ATA
Four Serial ATA Connectors
•
Transfer rate exceeding best ATA (~3.0 Gb/s) with scalability to higher
•
rates
Low pin count for both host and devices
•
Audio
• 5.1 Channel High Definition Audio Codec
•
All DACs support 192K/96K/48K/44.1KHz sample rate
•
Software selectable 2.5V/3.75V VREFOUT
•
Meets Microsoft WHQL/WLP 2.x audio requirements
•
Direct Sound 3D
compatible
TM
2