Advanced Setup - ECS P17G/1333 Series User Manual

Press <Esc> to return to the Standard CMOS Setup page.

Advanced Setup

This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
CPU TM function
Max CPUID Value Limit
Execute Disable Bit
Intel(R) SpeedStep(tm) tech.
Enhanced Halt (C1E)
Quick Power on Self Test
Boot up NumLock Status
APIC Mode
Boot Other Device
Security Check
F1: General Help
CPU TM function (Enabled)
For some specific brands of CPU, you can use this item to control the CPU frequency
and voltage according to its temperature.
Max CPUID Value Limit (Disabled)
Use this item to enable or disable the Max CPU ID value limit. When supports Prescott
and LGA775 CPUs, enables this to prevent the system from "rebooting" when trying
to install Windows NT 4.0.
Execute Disable Bit (Disabled)
This item is a security feature that helps you protect your CPU and operating system
against malicious software executing code. This item is available when CPU supports
the feature.
Intel (R) SpeedStep (tm) tech. (Disabled)
This item allows users to enable or disable the EIST (Enhanced Intel Speedstep Tech-
nology) function. This item shows only if the CPU supports EIST.
Enhanced Halt (C1E) (Enabled)
This item enables or disables enhanced halt.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is started.
Advanced Setup
Enabled
Disabled
Disabled
Disabled
Enabled
Enabled
On
Enabled
Enabled
System
Enter : Select
: Move +/-/: Value
F9: Optimized Defaults
25
Chapter 3: BIOS Setup Utility
Help Item
For the processor its
CPUID belows 0F41h.
TM2 only can be enable
under below setting.
1.Freq. >=3.6GHz FSB800
2.Freq. >=2.8GHz FSB533
F10: Save and Exit
ESC: Exit