Integrated Peripherals - ECS P17G/1333 Series User Manual

Share Memory Size (Enabled, 8MB)
This item lets you allocate a portion of the main memory for the onboard VGA display
application.
Press <Esc> to return to the main menu setting page.

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Onboard IDE Controller
Onboard SATA Controller
USB Functions
Legacy USB Support
Audio Controller
Onboard LAN Function
Onboard LAN Boot ROM
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
F1: General Help
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
Onboard SATA Controller (Enabled)
Use this item to enable or disable the onboard SATA controller.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the USB
controller legacy mode is enabled. If no USB device is detected, the legacy USB support
is disabled.
Audio Controller (Enabled)
Use this item to enable or disable the onboard audio controller.
OnBoard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network add-
in card with a remote boot ROM installed.
Integrated Peripherals
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
3F8&IRQ4
378
ECP
DMA3
IRQ7
: Move Enter : Select
+/-/: Value
F9: Optimized Defaults
27
Chapter 3: BIOS Setup Utility
Help Item
Disable / Enable the
integrated IDE
Controller.
F10: Save and Exit
ESC: Exit