Quasimidi Rave-O-Lution 309 Owner's Manual page 42

Here you can set the pan position for the sound-source on IN-1. You will now find another new
feature of the expansion card, which also affects the MIX menu of the other Instrument sections.
When panning an instrument or your external sound source all the way left, the sound will output
only via OUT 2 (LEFT) of the 309. If you pan all the way right you will get to OUT 1, OUT 3 and
OUT 4. OUT 1 outputs the sound only on the RIGHT channel of the stereo-sum. OUT 3 and OUT
4 are the new individual outputs, which the Audio Expansion provides you with. You will find a
more detailed explanation of the Individual outputs in the section "Assignment of Individual
Outs" in this manual.
On page 3 and 4 of the Menu you will find the effect sends:
Here you can adjust, how much of the external sound-source is being sent into the effect sections
FX 1 and FX 2 of the 309.
Caution: These parameters are not accessible, when the external sound sources are being routed
to one of the individual outputs OUT3 or OUT 4. These are dry outputs.
On page 5 of the menu you will find another new, usable feature:
In this basic setting the signal of the external sound-source is being sent through the filter and
amplifier (VCA) of the 309. Turning the EDIT-VALUE dial, you will be able to chose from the
individual instrument sections of the 309 among other options. This selection will serve to have
the external sound signal triggered by the rhythm of a sequencer track of the 309. This will create
the so-called "Gater-Effect". You can choose a different trigger track for each individual input. It
is of course essential to have the sequencer of the 309 running to make this effect operational.
When the external sound source is being triggered by a sequencer track you additionally have the
envelope curves (EG) of the 309 available for further treatment of the sounds. With the setting
"Midi" you are able to send a Trigger-Sequence from an external sequencer. When the system
channel of the 309 is set to 1 (Edit System), Input 1 is being triggered on Midi Channel 6 and
Input2 on Midi Channel 7. Using two different Sequences, the independent triggering of both
Edit Mix T: Ext1
<2> Pan: OUT2
Edit Mix T: Ext1
<3> Fx1Send:
Edit Mix T: Ext1
<4> Fx2Send:
Edit Mix T: Ext1
<5> Trigg: NoTrg
The Audio-Inputs
0
0
11