Assignement Of Individual Outputs - Quasimidi Rave-O-Lution 309 Owner's Manual

Assignement of individual Outputs

inputs allows the creation of very complex Gater effects.
The menu pages 6-26 contain all the parameters, which are also provided by the BASS-LEAD-
SYNTHESIZER section. After installation of the Audio Expansion you lose access to the
parameters on pages 6, 19, 20 and 24. To make these parameters functional you will also need to
install the Synthesizer Expansion card (available soon!).
Double clicking the F3 button calls up this display:
In principle everything in this menu functions in the same fashion as in the EDIT menus for the
outputs 1 and 2. The difference is that this menu has the additional feature of a Stereo mode,
which allows you to operate both inputs simultaneously. The only change is in the Parameter
"Pan". The factory preset provides for the stereo signal of an external sound source to be
automatically routed to the stereo-outputs of the 309. This means the stereo signal is being
maintained. When you change the parameter "Pan" in this menu, the panning of Ext 1 and Ext 2
is being changed concurrently in opposite directions. This means Ext 1 and Ext 2 assume always
opposing panning values i.e. R>60 for Ext 1 & Ext 2 results in R>60 for Ext1 and L<60 for Ext2.
Assignement of individual Outputs::
The feature especially valued by Professionals in an instrument like the 309 are additional
Outputs. The 309 Audio Expansion provides 2 additional ones. Using those you can send the
sound of a section "dry" to a channel on your Mixer. "Dry" means that the sound of the individual
out cannot be treated with the internal effects of the 309. Individual Outputs are best utilized to
treat a specific sound of the Synthesizer or the drum computer with external effect units. As the
Individual outputs of the 309 are polyphonic, it is also possible to assign 2 or more sections (for
instance Snare and HiHat) to one Individual Out. To assign an instrument to an individual output,
go to the Mix menu of the according section (in our example KICK). Select page 3 using the
EDIT-VALUE Dial, which contains the Parameter "Pan":
Turning the EDIT-VALUE Dial fully to the right makes OUT4 appear:
12
Edit Ext1 & Ext2
|1> MixLevel:100
Edit Mix T: Kick
<3> Pan:
Edit Mix T: Kick
<3> Pan: OUT4
>C<