Co 24 Control Output Panel; Figure 18: Co24 Control Output Panel - L-Acoustics dV-DOSC Operator's Manual

Hide thumbs Also See for dV-DOSC:
Table of Contents

Advertisement

1.8 CO 24 CONTROL OUTPUT PANEL

Figure 18: CO24 Control Output Panel

Digital signal processor outputs are assigned to MULTI return lines via the CO 24 CONTROL
OUTPUT panel. Internally, XLR outputs are patched from the digital processor to the 24x female
XLR patch bay on the internal side of the CONTROL OUTPUT panel. The convention for CO 24
channel assignments for A, B, C, D is: Channel 1 = Sub; Channel 2 = V-DOSC Low; Channel 3 = V-
DOSC Mid; Channel 4 = V-DOSC High; Channel 5 = dV-DOSC Low; Channel 6 = dV-DOSC High.
Always refer to the preset description table (supplied with PCMCIA cards) to determine correct
channel assignments for digital processor outputs. For detailed information on multicore line
assignments, please refer to the tables in the appendices of the V-DOSC manual.
All MULTI lines are paralleled with the Left-Left, Left, Right, Right-Right (A, B, C, D) CA-COM
connectors located on the front panel of CO 24. These individual CA-COM connectors can be used
in situations where CONTROL RACKS are located onstage (eliminating the need for a MULTI
DISTRO panel) or when it is desirable to run separate drive snakes to remotely located AMP RACKS
For example, in some cases, amplifier racks may be located at delay towers behind the FOH location
and separate snake runs required. In smaller venues, a pair of DOM30 cross link cables (with LINK
EXTEND DOMP adaptors if necessary) can be run directly from the CA-COM connectors on CO24
and used for system drive instead of the MC2875 multicore. In addition, the availability of individual
CA-COM connectors allows a LINK BREAKOUT cable (DOMM) to be connected to these outputs
for testing purposes.
For amplifier remote control/monitoring, inputs and outputs are assigned directly to the appropriate
MULTI lines. The exact connector type will depend on the model of amplifier selected and the
number of required lines will depend on specific amplifier requirements.
dV-DOSC dV-SUB Manual V2.0
Nov 2001
46

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-sub

Table of Contents