L-Acoustics dV-DOSC Operator's Manual page 116

PROCEDURE 2
(i) dV-DOSC are pre-attached in blocks of 3
(ii) Flip dV-DOSC onto dV-SUB dolleys to position under the dV-SUB array
(iv) dV-DOSC front point attachment using dV-ANGLESD. The array is then
(iii) Standalone dV-SUB techniques (see above) are used to fly the dV-SUB array
raised and the rear points attached using dV-ANGLESDP
dV-DOSC dV-SUB Manual V2.0 Nov 2001 116