Advertisement
The Trimmer must not be operated during
charging.
Only charge battery between 10 – 45 °C. After
heavy duty service allow battery to cool down
first.
3. Assembly
DANGER !
Risk of injury !
Fit cover and plant guard :
4
Fit magazine for
spare blades :
7
6
Risk of injury from blade !
V Always ensure the cover is fitted ! The Trimmer should
not be used without the cover being fitted.
1. Turn Trimmer round and place on rubber pad of handle.
1
2. Pull cover
2
carrier
.
3. Attach cover
and screw down with both
4
screws
.
4. Slide plant guard
1
Trimmer until connection
audibly snaps into place.
2
The plant guard keeps plants
which are not to be trimmed
3
back away from the blade.
20 plastic blades and a magazine for spare blades are supplied
with your trimmer. Up to 8 spare blades can be stored in the
magazine.
1. Slightly widen magazine
7
handle
.
z
m
2. Insert up to 8 plastic blades
blades jam.
To fit blade into blade carrier see 8. Troubleshooting
"Replacing blades" .
Storage :
The trimmer must not be stored over 35 °C or
under direct exposure to sunlight.
Do not store the trimmer in places with static
electricity.
over blade
1
3
to hook
5
onto
6
at open point and slide onto
z
in the magazine
m
5
6
until the
13
Advertisement
