Installing Tappets And Camshaft - Wacker Neuson WM 90 Repair Manual

Reassembly Procedures
8.6

Installing Tappets and Camshaft

See Graphic: wc_gr001905
8.6.1
8.6.2
8.6.3
a
b
wc_gr001905
wc_tx000389gb.fm
Oil the tappets (a) and install them. Push them in fully to avoid damage
during camshaft (b) installation.
Remove spacer (c) to allow viewing of timing mark.
Lubricate the bearing surfaces of camshaft. Align the timing marks (d)
on the camshaft with the timing marks on the crankshaft and install the
camshaft into the crankcase.
NOTICE: Incorrect valve timing will cause malfunction of the engine.
c
d
58
WM 90 Repair