Removing Tensioner And Camshaft - Wacker Neuson WM 130 Repair Manual

Disassembly Procedures

8.11 Removing Tensioner and Camshaft

See Graphic: wc_gr001768
8.11.1 Remove the tensioner pin (a), tensioner spring (b), and the tensioner
8.11.2 Remove M6 camshaft pin retaining bolt (d). Remove the camshaft pin
8.11.3 Remove the chain (f) from the camshaft. Remove the camshaft (g).
8.11.4 Remove chain from crankshaft.
wc_tx000379gb.fm
(c).
(e). Be careful not to damage the pin's O-ring.
WM 130/170/270 Repair
48