WM 90 Repair
See Graphic: wc_gr001832
10.1.11 Apply grease (Exxon Unirex or equivalent) (a) to the surface of the
10.1.12 Adjust the position of the inner end of the spring reel. Reference (b):
10.1.13 Hold the reel in such a way that the inner end of the spring hooks onto
See Graphic wc_gr001833 and wc_gr001834
10.1.14 Mount the ratchet into the reel. The ratchet should be in the closed
10.1.15 Mount the ratchet guide assembly (b), taking care to not move the
10.1.16 Tighten the set screw (c). Torque to 5.5 Nm (4.0 ft.lbs.).
wc_tx000627gb.fm
Reassembly
Re-installing the reel:
case.
position where the inner end of the spring touches the rib of the
bearing.
the shaft hook (c) and then place the reel carefully back into the case.
Reinstalling the components:
position (a).
ratchet or lose the friction spring (d).
83
Recoil Starter