Introduction; How To Use This Manual; Introducing The Upj-1P Compact Vario™ Loudspeaker - Meyer Sound Compact VariO UPJ-1P Operating Instructions Manual

INTRODUCTION

HOW TO USE THIS MANUAL

As you read this manual, you'll find figures and diagrams
to help you understand and visualize what you're reading.
You'll also find numerous icons that serve as cues to flag
important information or warn you against improper or po-
tentially harmful activities. These icons include:
A NOTE identifies an important or useful
piece of information relating to the topic
under discussion.
TIP
A offers a helpful tip relevant to the topic
at hand.
A CAUTION gives notice that an action can
!
have serious consequences and could cause
harm to equipment or personnel, delays, or other
problems.
INTRODUCING THE UPJ-1P COMPACT VARIO™
LOUDSPEAKER
The UPJ-1P compact VariO loudspeaker combines the
advantages of being self-powered with the placement
and arraying flexibility afforded by a VariO rotatable horn.
Remarkably compact and lightweight, the UPJ-1P (Figure
i.1) produces a robust peak power output of 128 dB SPL
at 1 meter, making it suitable for use either as a primary
loudspeaker in small rooms or as a fill, delay, effects or un-
der-balcony loudspeaker in any type of large or distributed
system application.
Figure i.1: UPJ-1P compact VariO loudspeaker
The UPJ-1P's low-frequency section employs a 10-inch
neodymium magnet cone driver, while the high-frequency
section utilizes a 0.75-inch exit, 3-inch diaphragm compres-
sion driver of proprietary design. The VariO horn allows
quick rotation to provide a 80° x 50° coverage pattern in ei-
ther the horizontal or the vertical plane. A two-channel class
AB power amplifier with complementary MOSFET output
stages provides a total output of 300 watts for the low- and
high-frequency sections.
The UPJ-1P cabinet's end plates provide unprecedented
mounting, flying and arraying flexibility, and are made of
heavy duty, high-strength, corrosion-resistant 6061-T6
aluminum. Strategically placed M8 threaded points allow
simple mounting using eyebolts or directly to third party
pole assemblies. Available QuickFly® rigging options — in-
cluding an array adapter (also made from 6061-T6 alumi-
num), yokes, and "L"-brackets — attach easily and securely
to the aluminum end plates allowing UPJ-1P to be mounted
or flown, either as a single cabinet or in arrays. The optional
RMS™ remote monitoring system module allows com-
prehensive monitoring of all key system parameters on a
remote RMS host PC.
NOTE: Read this entire manual carefully
before configuring and deploying a UPJ-1P
system. In particular, pay careful attention to the
sections about safety issues.
Information and specifications are applicable as of the date
of this printing. Updates and supplementary information are
posted on the Meyer Sound website at:
http://www.meyersound.com
You may contact Meyer Sound Technical Support at:
Tel: +1 510 486.1166
Fax: +1 510 486.8356
Email: techsupport@meyersound.com
INTRODUCTION
1