Motorola MBP26 User Manual page 10

4. IfIf there is no connection or you are out of range, the video display
will go off and the symbol
unit will beep every 9 seconds. (If the unit is on scan
symbol displays.) Move the parent unit closer to the baby until the
link is re-established.
5. Press and hold the
bar scrolls fully across, to turn OFF the parent unit.
NOTE
The battery icon
is low, and it gives a beep every 16 seconds. The battery needs to be
recharged. Battery pack takes about 16 hours to charge fully.
When charging
1. If the parent unit is turned OFF, when the adapter is plugged in, it
displays a "mains plug" icon briefly, then a large battery icon with
internal segments cycling for 60 seconds, before the display goes
blank, but the unit continues to charge. The Blue LED at top left
corner lights up to indicate the adapter is plugged in.
2. If the parent unit is turned ON, when the adapter is plugged in, the
battery icon in the screen's top right corner will show that the battery
is charging by cycling the internal segments. The segments stop
cycling when the battery is fully charge. The Blue LED at top left
corner lights up to indicate the adapter is plugged in.
10
will flash on the LCD display, and the
P
POWER ON/OFF button, until the progress
turns RED and flashes to indicate that the battery
1 ?
the
Getting Started