Installation Recess; Installation In The Recess; Recess Dimensions - Dometic RM 5310 Installation Instructions Manual

4.5

Installation recess

The refrigerator must be installed draught-
proof in a recess (also refer to Section "4.1.4").
The measurements of the recess are stated in
the table below. Step A (Fig. 26) is only requi-
red for cabinets with a step. The floor of the
recess must be level, allowing the appliance to
be pushed easily into its correct position. The
floor must be substantial enough to bear the
weight of the appliance.

4.5.1 Installation in the recess

Push the appliance far enough into the recess
until the front edge of the refrigerator casing is
aligned with the front of the recess. Allow a
gap of 15-20 mm between the back wall of
the recess and the refrigeration unit.
Ensure that the refrigerator is installed
level in the recess.

4.5.2 Recess dimensions

A
T
ST
T
Fig. 25
Model RM 5310
Height
620 mm
Model RM 5330
Height
825 mm
Height Step
220 mm
Model RM 5380
Height
825 mm
15
Installation
H
H
ST
T
Width Depth
490 mm 450 mm
Width Depth
490 mm 450 mm
Width Step Depth Step
490 mm 225 mm
Width Depth
490 mm 450 mm
H
Fig. 26